Best Practices for Caring for Anti-Slip Decking Strips

In general, non-slip Decking Strips are excellent in the protection of outdoor surfaces. This is primarily due to the areas that tend to get slippery either because of moisture, algae, or dirt. Proper care and maintenance of such bars will not only extend their life but also hold up their efficiency. 

Regular Cleaning

Anti-slip strips require cleaning to ensure their beauty and appearance are maintained properly. Over time, they pick up dirt, algae, and other types of debris, rendering them less sticky. The steps for the cleaning process are pointed out below: Use a broom or stiff brush regularly to keep loose dirt, leaves, or other debris off this area. This would not allow this debris to accumulate and weaken the effect of these strips.

Power washing: Use a low-to-medium pressure water sprayer to remove more significant dirt or algae. Be just careful not to let the water pressure get too high. This can damage the pallet or even the floor.

Regular Inspection

Inspect for damage: The mat should also be inspected on a regular basis for any potential wear or problems which would affect the performance of the tape.

Adhesion testing: for adhesive strips ensure they are in place. When such straps are loose, they form tripping points and thus the floor becomes unsafe for passage.

Inspect for cracks or breaks: It is important to regularly inspect the surface of the tape for cracks, peeling, or breaks. In case the strap is damaged, replace it immediately for safety.

Preventative Steps

Preventive measures can be taken to reduce how often the Anti Slip Strips For Decking needs maintenance and to elongate its life.

Protective coatings: A few of the skid plates can be benefited with protective coatings that are designed to repel dirt and water.

Mow surrounding grass: Trees and overhanging branches from nearby trees deposit dirt and moisture on your deck. Cutting down trees reduces the amount of organic matter that gathers.

Seasonal Ideas

All seasons do not similarly affect the anti-slip floor mat's performance and its maintenance requirement.

Autumn: Remove fallen leaves as soon as possible to avoid rotting. 

Winter: Avoid using metal shovels or any other tool with a metal edge, to remove ice or snow. This may scratch or damage the pallet. Instead use a plastic shovel or anti-slip ice removal product.

Spring: Perform a general check-up to address any problems that may have arisen over the winter. Different materials and designs may have specific requirements when it comes to cleaning, maintenance, and repair.

Use Compatible Cleaning Agents: Do not take a chance on damaging the pads by using anything other than the recommended cleaning agents specified by the manufacturer. You can be certain that the warranty will cover any repairs or replacements you may require.

Change when necessary: Anti Slip Decking Strips will, over time wear out. It is just a matter of time before worn strips will have to be changed for safety purposes.

How to Inspect and Change

Lifetime check: Monitor continually the life span of the tape as indicated by the manufacturer.

Change the tape: Once the surface is worn or damaged by adhesive.